IRAMLOG - IRAM Plateau de Bure Interferometer Observation Log

Overview

The HEASARC renamed this database table to IRAMPDBLOG and deprecated usage of this old table name. Please refer to the new table for the latest information.

This table contains the IRAM Plateau de Bure Interferometer observation log. The Institut de Radio Astronomie Millimetrique (IRAM) was founded in 1979 and is operated as a French-German-Spanish collaboration. Its partner institutes are the CNRS (Centre National de la Recherche Scientifique, France), the MPG (Max Planck Gesellschaft, Germany), and the IGN (Instituto Geografico Nacional, Spain). The principal activity of IRAM is the study of cold matter (molecular gas and dust) in the solar system, in our Galaxy, and out to cosmological distances, in order to determine its composition, density, mass, temperature, and kinematics.

IRAM operates two observatories at millimeter wavelengths which are open to the international astronomical community: the 30-m single-dish telescope on Pico Veleta (2850m), Spain, and the six-antenna interferometer on the Plateau de Bure (2550m) in France. Both sites are at high altitude to reduce the absorption by water vapor. The observatories are supported by the IRAM offices and laboratories in Granada and Grenoble.

The observation log included here concerns the Plateau de Bure Interferometer (PdBI), and summarizes the observations made there between December 1990 and March 2009 inclusive. No observation was done in the periods of 1999-Sep-30 to 2000-Dec-03, and of 2006-Sep-25 to 2007-Jan-18 (installation of the new receiver), notice. For more information on IRAM, see the IRAM home page.

Catalog Bibcode

References

Plateau de Bure (IRAM) Interferometer Observation Log
     Dan M., Neri R
    <IRAM Newsletters (1991-2010)>

Provenance

This table was originally ingested by the HEASARC in November 2005. It is based on the CDS table B/iram/, files pdbi.dat and pi.dat. It was last updated in April 2010, based on these CDS tables, which had been updated by the CDS on April 12th, 2010. The HEASARC then renamed the table to IRAMPDBLOG and deprecated usage of the old table name. Please refer to the new table for the latest information.

Parameters

Program_Code
The identification code of the IRAM PdBI program.

Name
The source designation as given in the observing program.

Start_LST
The start time and date of the observation in Local Sidereal Time.

Stop_LST
The stop time and date of the observation in Local Sidereal Time.

Time
The start time and date of the observation in UTC. This parameter was created by the HEASARC based on the value of the start_lst parameter and the 5d 54' 28.5" East longitude of the PdBI, using standard conversion routines.

End_Time
The end time and date of the observation in UTC. This parameter was created by the HEASARC based on the value of the stop_lst parameter and the 5d 54' 28.5" East longitude of the PdBI site, using standard conversion routines.

Exposure
The total on-source correlation time, in seconds.

Program_Type
The observing program type: DET=detection, MAP=mapping, MOS=mosaicking and SNA=snapshot.

Original_Equinox
The original equinox of the position, expressed either as a 1950 or 2000 position; all positions have been converted to J2000 in this version of the log.

RA
The Right Ascension of the observed source in the selected equinox. This was given in J2000 coordinates and to a precision varying from 0.0001 to 0.1 seconds of time in the CDS table upon which this Browse table is based. No positions are given for observations of objects in the solar system.

Dec
The Declination of the observed source in the selected equinox. This was given in J2000 coordinates and to a precision varying from 0.001 to 1 arcseconds in the CDS table upon which this Browse table is based. No positions are given for observations of objects in the solar system.

LII
The Galactic Longitude of the observed source.

BII
The Galactic Latitude of the observed source.

Source_Velocity
The radial velocity of the source, in km/s. The velocity may be forced to zero if the velocity is integrated in the frequency.

Source_Velocity_Type
This parameter is a flag which is used to indicate whether the quoted source_velocity is in the Local Standard of Rest (L) or heliocentric (H) velocity reference frame.

Sky_Frequency_3mm
The sky frequency of the 3-mm receiver, in MHz. For the observations made up to 2006, the sky_frequency_3mm and sky_frequency_1mm parameters list the frequencies in the 2 available bands corresponding to 3 mm and 1 mm, respectively. From 2007 on, the actual min and max frequencies are listed in these 2 parameters, and the 2 polarization parameters were added.

Sky_Frequency_3mm_Lim
This parameter is a flag which is used to indicate whether the signal is in the upper (U) or lower (L) band of the 3-mm receiver.

Sky_Frequency_1mm
The sky frequency of the 1-mm receiver, in MHz. For the observations made up to 2006, the sky_frequency_3mm and sky_frequency_1mm parameters list the frequencies in the 2 available bands corresponding to 3 mm and 1 mm, respectively. From 2007 on, the actual min and max frequencies are listed in these 2 parameters, and the 2 polarization parameters were added.

Sky_Frequency_1mm_Lim
This parameter is a flag which is used to indicate whether the signal is in the upper (U) or lower (L) band of the 1-mm receiver.

Polarization_Hv
This parameter is a flag which is used to indicate the whether the polarization of the 3-mm continuum is horizontal (H) or vertical (V).

Polarization_4_GHz
This parameter is a flag which is used to indicate the whether the polarization of the 4-GHz (1-mm) continuum is horizontal (H) or vertical (V).

Configuration_Code
The configuration code of the interferometer, consisting of the number of antennas used and the configurations (A, AB, B, BC, C, CD and D, usually).

Configuration_Detail
The detailed configuration of the interferometer, viz. a listing of the antenna station positions. W00 is the crossing point of the E-W and N antennae, and one numerical unit corresponds to approximately 8 meters. More information on the configurations and their corresponding spatial resolution is available at http://www.iram.fr/IRAMFR/GILDAS/doc/html/noema-intro-html/node4.html.

PI_Name
The name of the Principal Investigator under whose program the observation was carried out.

Contact Person

Questions regarding the IRAMLOG database table can be addressed to the HEASARC Help Desk.

Page Author: Browse Software Development Team
Last Modified: Wednesday, 23-Nov-2022 19:34:55 EST