NOTE! All science windows which end with 1.000 are taken in SLEW mode, thus should not be used for running SPIROS / SPISKYMAX (run blc_sa only up to the BIN_I level!). The PLC data are not fully tested up to now. You will probably have some problems when running the SPI analysis software on this data. Only a few pointings have been tested up to now using SPI scientific analysis:
SCW ID | SPI mode | Remarks |
001000260010.000 | OPER | strong 80 keV line |
001000270010.000 | OPER | strong 80 keV line |
001000280010.000 | OPER | strong 80 keV line |
001000290010.000 | OPER | problems with processing |
001000500010.000 | OPER | 573 GTI intervals in this pointing |
001000500020.000 | OPER | 608 GTI intervals in this pointing |
001000500030.000 | OPER | 594 GTI intervals in this pointing |
001000520010.000 | OPER | GTI intervals in this pointing |
001000520020.000 | OPER | GTI intervals in this pointing |
001000520030.000 | OPER | GTI intervals in this pointing |
In case of questions and comments: contact Volker at the GSFC.